FTTR-Bxx12-80xx 1.25G 1×9 BIDI 光收发模块 80km

Product Description

F-tone’s FTTR-Bxx12-80xx BIDI series of transceiver modules are the perfect solution for high-speed communication networks. These transceiver modules support data rates up to 1.25Gbps. The module is fully compliant with the Multi-sourced 1×9 protocol. These single fiber Bi-Directional transceiver modules provide the system designer with products to implement a range of Fiber Channel and Gigabit Ethernet designs at the 1.06/1.25Gbps rate for communications.

Product Features

  • DFB Laser Diode Transmitter
  • Up to 80Km on 9/125μm SMF
  • 3.3V or 5V power supply
  • SC/ST/FC single optical interface
  • (LV)PECL Differential Input/Output and (LV)PECL or (LV)TTL signal detect
  • Class 1 Laser International Safety Standard IEC 825 Compliant
  • Operating case temperature range: Standard: 0 to +70°C / Industrial: -40°C to +85°C

Application

  • Gigabit Ethernet
  • Fiber Channel
  • Digital Video Transmission System
  • Other Optic Link

Absolute Maximum Ratings

Parameter Symbol Min Max Units Note
Storage Temperature TST -40 +85 ℃ –
Relative Humidity RH 5 95 % –
Supply Voltage (3.3V power) VCC 0 +3.6 V –
Supply Voltage (5V power) VCC 0 +6 V –

Recommended Operating Conditions

Parameter Symbol Min Typ Max Units Note
Supply Voltage (3.3V) VCC +3.1 +3.3 +3.5 V –
Supply Voltage (5V) VCC +4.75 +5.0 +5.25 V –
Supply Current ICC – – 260 mA –
Operating Case Temperature (Standard) TOP 0 – +70 ℃ 1
Operating Case Temperature (Industrial) TOP -40 – +85 ℃ 2
Data Rate B 100 1250 1500 Mbps –

Optical Characteristics — FTTR-B4512-80xx (1490T/1550R)

Parameter Symbol Min Typ Max Units Note
Transmitter
Data Rate B 100 1250 1500 Mbps –
Output Center Wavelength λc 1470 1490 1510 nm –
Output Spectral Width (-20dB) Δλ – – 1 nm –
Average Optical Output Power Po -2 – +3 dBm 1,2
Extinction Ratio ER 8.2 – – dB 1,2
Receiver
Receiver Sensitivity Pmin – – -26 dBm 1,2
Receiver Saturation Pmax -3 – – dBm 1,2
Operation Center Wavelength λc – 1550 – nm –
Deassert PSD – -35 – – dBm 1,2
Assert PSD – – – -26 dBm 1,2
SD Hysteresis SDHYS 0.5 – – dB –

Optical Characteristics — FTTR-B5412-80xx (1550T/1490R)

Parameter Symbol Min Typ Max Units Note
Transmitter
Data Rate B 100 1250 1500 Mbps –
Output Center Wavelength λc 1530 1550 1570 nm –
Output Spectral Width (-20dB) Δλ – – 1 nm –
Average Optical Output Power Po -2 – +3 dBm 1,2
Extinction Ratio ER 8.2 – – dB 1,2
Receiver
Receiver Sensitivity Pmin – – -26 dBm 1,2
Receiver Saturation Pmax -3 – – dBm 1,2
Operation Center Wavelength λc – 1490 – nm –
Deassert PSD – -35 – – dBm 1,2
Assert PSD – – – -26 dBm 1,2
SD Hysteresis SDHYS 0.5 – – dB –

Note 1: The optical power is launched into 9/125μm SMF.
Note 2: With a PRBS 2²³-1 test pattern @1250Mbps.

Electrical Characteristics

Parameter Symbol Min Typ Max Units Note
Supply Voltage (3.3V) VCC +3.1 +3.3 +3.5 V –
Supply Voltage (5V) VCC +4.75 +5.0 +5.25 V –
Supply Current ICC – – 260 mA –
Transmitter
Differential Input Voltage VIN P-P 400 – 2000 mV –
Input Differential Impedance Zin 90 100 110 Ω –
Receiver
Differential Output Voltage VOUT P-P 400 – 2000 mV –

Pin Definitions

Pin # Pin Name Description Note
1 RX VEE Receiver Signal Ground –
2 RD+ Receiver Data Out –
3 RD- Receiver Data Out Bar –
4 SD Signal Detect, (LV)PECL or (LV)TTL outputs 1
5 RX VCC Receiver Power Supply –
6 TX VCC Transmitter Power Supply –
7 TD- Transmitter Data In Bar –
8 TD+ Transmitter Data In –
9 TX VEE Transmitter Ground –

Recommended Circuit Schematic 3.3V SDLVPECL

Recommended Circuit Schematic 5V SDPECL / 3.3V SDLVTTL

Recommended Circuit Schematic 5.0V SDTTL / Module Outline SC

FC/ST Receptacle Outline

Ordering Information

Part Number Product Description
FTTR-B4512-80 1×9 Transceiver Module, BIDI, 1490T/1550R, 1.25G, 80km, 0 to +70°C
FTTR-B4512-80I 1×9 Transceiver Module, BIDI, 1490T/1550R, 1.25G, 80km, -40°C to +85°C
FTTR-B5412-80 1×9 Transceiver Module, BIDI, 1550T/1490R, 1.25G, 80km, 0 to +70°C
FTTR-B5412-80I 1×9 Transceiver Module, BIDI, 1550T/1490R, 1.25G, 80km, -40°C to +85°C
Company: F-tone Networks | 北亿纤通
Region: Tianfu New Area, Sichuan, China
Service Area: Global
Tel: 028-85255257 | Fax: 028-85977702 | Mobile: 19081343401
Site: https://www.f-tone.com
HR: hr@f-tone.com | Sales: sales@f-tone.com | Support: support@f-tone.com

本产品为【光模块】产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.