MPO型光纤活动连接器 行业认定规范 | YD/T 1272.3-2005 | F-tone NetworksMPO/MTP连接器, MPO连接器行业规范, 连接器产品12芯, 24芯, Angled Connector, APC, Backplane Socket, End-face Geometry, F-tone Networks, Guide Pin, Guide Pin Holder, Insertion Loss, MPO Adapter, MPO Connector, MPO Female Plug, MPO Male Plug, MPO连接器, MPO适配器, MPO阳插头, MPO阴插头, MTP Connector, MTP连接器, Multi-fiber Connector, Optical Fiber Connector, Parallel Optics, PC, PCB Socket, Plane Connector, Return Loss, YD/T 1272.3-2005, 光纤活动连接器, 北亿纤通, 单模MPO, 印制板式插座, 回波损耗, 多模MPO, 多芯连接器, 导针, 导针架, 平面连接器, 并行光学, 插入损耗, 数据中心, 斜面连接器, 端面几何, 背板式插座, 行业标准
FT-12MM-001 MT12芯多模标损插芯 REV.A4 (PPS 12芯MM标损 8.0×7.0mm 12xØ0.1260-0.1280光纤孔 2xØ0.6990-0.7010定位销孔 4.6±0.003mm定位孔中心距 2.75mm定位孔中心到光纤阵列中心距离 BOOT 5.2×3.0x2.45mm RoHS2.0 4次版本修订 A1→A4) | F-tone Networks 北亿纤通FT-12MM-001 MT12芯多模标损插芯 REV.A4 (PPS 12芯MM标损 8.0x7.0mm 12xØ0.1260-0.1280光纤孔 2xØ0.6990-0.7010定位销孔 4.6±0.003mm定位孔中心距 2.75mm定位孔中心到光纤阵列中心距离 BOOT 5.2x3.0x2.45mm 端面3.55±0.05mm RoHS2.0), MT插芯连接器, 光纤配件, 连接器-10dBm, .X±0.1, .XX±0.05, .XX±0.15, .XXX±0.01, ±0.01, ±0.05, ±0.05mm, ±0.20, ★ Key Control Dimension, ★ 重点管控尺寸, 0.0025 公差, 0.0025mm Position, 0.1260-0.1280mm, 0.5km MMF, 0.6990-0.7010mm, 0.7mm Pin Hole, 0.7mm 定位销孔, 1 decimal ±0.1, 1:1, 1:1 Scale, 1.1mm, 1.25G SFP RoHS, 1.55±0.05mm, 1/1 Page, 100G AOC, 100G Ethernet, 100G Ethernet 100GBASE-SR4, 100G QSFP28 SR4 OM3, 100G QSFP28 SR4 OM4, 100G SR4, 100G 以太网, 100G 数据中心, 10km Reach, 12 Fiber Holes, 12 Fiber Holes Ø0.1260-0.1280mm, 12 MT, 12-Core Fiber Hole, 12-Fiber Ferrule, 12-Fiber MPO, 12F Ferrule, 12F MPO, 12F MPO Connector, 12xØ0.1260-0.1280, 12个光纤孔, 12芯 Ferrule, 12芯 MPO, 12芯 MPO 连接器, 12芯MT插芯, 12芯光纤孔, 131Mpps, 1531.6nm F-toneNetworks, 1531.6nm 北亿纤通, 2 decimal ±0.05, 2 Pin Holes, 2.45±0.05mm, 2.4mm, 2.5μm Position, 2.5µm 位置度, 2.75mm Pin-to-Fiber, 24 Fiber MT Ferrule, 24 芯 MT 插芯, 2xØ0.6990-0.7010, 2xØ0.6990-0.7010mm, 2个定位销孔, 3 decimal ±0.01, 3.17±0.05mm, 3.55±0.05mm, 3mm Jacket, 4.6±0.003mm, 4.6mm Pin Center Distance, 40G Ethernet, 40G 以太网, 40GBASE-SR4, 5.2+0.2/0 mm, 7.0mm, 8.0mm, 8.0x7.0mm, A=0.37±0.05mm, A1 2019.09.01, A2 2023.09.25, A3 2024.09.28, A4 2024.10.15, Active Optical Cable, Add Technical Requirements, Add Triangular Markings, Adjust Product Tolerances, Andy, ANDY Designer, ANDY 设计, Approved by SAM, Approver SAM, BOOT 5.2x3.0x2.45mm, BOOT Dimensions, BOOT End Face 3.55mm, BOOT Height 3.0mm, BOOT Length 5.2mm, BOOT Slot Depth 0.37mm, BOOT Slot Width 3.17mm, BOOT Step Height 1.1mm, BOOT Step Length 2.4mm, BOOT Total Height 1.55mm, BOOT Width 2.45mm, BOOT 台阶长 2.4mm, BOOT 台阶高 1.1mm, BOOT 宽度 2.45mm, BOOT 尺寸, BOOT 开槽 3.17mm, BOOT 总长 5.2mm, BOOT 总高 1.55mm, BOOT 总高 3.0mm, BOOT 槽深 0.37mm, BOOT 端面 3.55mm, BOOT 高度 3.0mm, Breakout Cable, Cavity 6.0x6.4mm, Cavity Height 6.4mm, Cavity Width 6.0mm, Checked by JACK, Checker JACK, China Manufacturer, China MT Ferrule, China Multimode Ferrule, COBO, Data Center, Data Center Interconnect, Designed by ANDY, Designer ANDY, Dimension Drawing, Domestic Substitute, Drawing Rev A4, End Face 1.55±0.05mm, End Face Width 1.55mm, Engineering Drawing, F-tone Engineering Drawing, F-tone FT-12MM-001, F-tone MPO Ferrule, F-tone MT 12F MM Ferrule, F-tone MT Ferrule, F-tone MT Ferrule Series, F-tone MT插芯系列, F-tone Multimode Ferrule, F-tone Networks, F-tone Spec Sheet, F-tone 全国产, F-tone 北亿纤通, F-tone 工程图纸, F-tone 规格书, Fiber Array Center 2.75mm, Fiber Array to Pin Distance, Fiber Hole 125.5um, Fiber Hole Diameter, Fiber Hole Tolerance, Flame Retardant PPS, FS801 Metric Thread, FS801 公制螺纹, FS801 多模光纤, FT-12MM-001, FT-12MM-001 MM Ferrule, FT-12MM-001 MT12 Ferrule, FT-12MM-001 MT12芯多模标损插芯, FT-12MM-001 Multimode Ferrule, FT-12MM-001 REV A4, FT-12MM-001 REV.A4, FT-13-MPO-LC-母头 (relative), FT-13-MPO12, FT-13-MPO12 (relative), FT-DW-24-0119, FT-DW-24-0119 Drawing, FT-DW-24-0119 图纸, FT-Y System Reboot, Halogen Free, HARDNESS /, Hardness Not Specified, High Precision, High Precision Ferrule, High Temperature PPS, IEC 61754, IEC 61754-7, IEC 61754-7 MPO, IEC 61754-7 Standard, IEC 61754-7-1, Insert Body 8.0x7.0mm, Internal Cavity 6.0x6.4mm, J599MT 12 Contacts, J599MT 48芯 (relative), J599MT MT12, J599MT-26KA48B2N (relative), JACK Checker, JACK 审核, JYSK2M12ND-12芯 M12圆形多模OM3铠装光缆组件 (relative), Key Control Dimensions, Key Control Size, Lead Free, LGA 板载光模块, Made in China, Mechanical Drawing, Mechanical Spec, Mechanical Specification, millimeter, MM Ferrule, MPO Connector, MPO Ferrule, MPO Standard, MPO Trunk, MPO 插芯, MPO 连接器, MPO-12芯多模, MPO-LC Breakout, MPO/MTP, MPO/MTP Connector, MPO/MTP Standard, MT 12F, MT 12F Ferrule, MT 12F MM Ferrule, MT 12F Multimode Ferrule, MT 12芯, MT 12芯多模插芯, MT 12芯插芯, MT Ferrule, MT Ferrule MM, MT Multimode, MT Standard Ferrule, MT Standard Loss, MT 插芯, MTP Connector, MTP Ferrule, MTP Standard, MTP 插芯, MTP 连接器, MTP/MPO, MTP12, Multimode Ferrule, Multimode Ferrules, Multimode Fiber, No Damage, No decimal ±0.2, No Defects, No Plugging, Ø0.0025 Position Tolerance, Ø0.0025mm, Ø0.1260-0.1280mm, Ø0.1260mm, Ø0.6990-0.7010mm, Ø0.6990mm, OM3 MMF, OM4 MMF, OM5, OM5 MMF, On-Board Optics, Optical Backplane, Optical Ferrule, Optical Interconnect, Optical Interconnection, Optical Mid-board, Parallel Optic, Parallel Optics, Pb-free, Pin Center 4.6mm, Pin Center Distance 4.6mm, Pin Hole Center-to-Center 4.6mm, Pin Hole Diameter, Pin Hole Spacing 4.6mm, Pin to Fiber Array 2.75mm, Pin-to-Fiber 2.75mm, Polyphenylene Sulfide, Polyphenylene Sulphide, Position Tolerance Ø0.0025, PPS Engineering Plastic, PPS Material, PPS Plastic, PPS Resin, PPS RoHS, PPS RoHS2.0, PPS 塑料, PPS 工程塑料, PPS 材质, Precision Engineering, Precision Machining, Precision Manufacturing, Precision Tolerance, Product Drawing, Product Size and Appearance, Product Specification Drawing, Production Drawing, Production Quality, QC, QSFP SR4, QSFP28 SR4, Quality Control, REACH Compliant, REACH SVHC, Release to Sales, REV A1, REV A2, REV A3, REV A4, REV.A4, Revision History, RoHS 2, RoHS 2.0, RoHS 2.0 合规, RoHS 2011/65/EU, RoHS compliant, RoHS Directive, RoHS2.0, RoHS2.0 Compliant, RoHS2.0 Environment, RoHS2.0 Standard, RoHS2.0 环保, RoHS无铅, SAM, SAM Approval, SAM 批准, SCALE 1:1, Sheet 1/1, Size Consistency, Standard Ferrule, Standard Loss Ferrule, Tail Sleeve, Technical Drawing, TIA 568, TIA-568.3, TIA-568.3-E, TIA-568色序, Tolerance ±0.01, Tolerance ±0.05, Tolerance ±0.1, Tolerance ±0.2, Trunk Cable, Update Drawing Template, X.±0.2, 不允许堵孔, 不允许破损, 中国 MT 插芯, 中国制造, 主干光缆, 产品图纸, 产品尺寸与外观, 位置度公差 Ø0.0025, 低烟无卤, 修订历史, 光纤孔 125.5µm, 光纤孔公差, 光纤孔直径, 光纤插芯, 光纤阵列中心 2.75mm, 光纤阵列到定位孔距离, 光背板, 内部腔体 6.0x6.4mm, 国产 Ferrule, 国产MT插芯, 国产替代, 圆形分支光缆, 外观一致, 多模插芯, 定位孔 0.7mm, 定位孔中心到光纤阵列中心距离 2.75mm, 定位孔中心距 4.6±0.003mm, 定位孔中心距 4.6mm, 定位销孔直径, 尺寸一致, 尺寸图纸, 尾套, 尾靴, 并行光通信, 技术图纸, 插芯主体 8.0x7.0mm, 新增三角标识, 新增技术要求, 无不良, 更新图纸模板, 有源光缆, 机械规格, 标损插芯, 比例 1:1, 毫米, 生产质量, 端面宽度 1.55mm, 精密公差, 精密制造, 耐高温 PPS, 聚苯硫醚, 被动光互连, 调整产品公差, 质量控制, 重点管控尺寸, 阻燃 PPS, 高精度
