FTCP-151X-H2D 10.3Gbps SFP+ 单模120km光收发器(内置CDR)

产品概述 / Description

FTCP-151X-H2D 是北亿纤通(F-tone Networks)推出的 10.3Gbps SFP+ 单模 120km 超长距光收发一体模块,采用 1550nm 制冷型 EML 激光器与 APD 光电探测器,内置收发双向 CDR,商业级工作温度 0℃~+70℃。

The SFP+ transceivers are high performance (with TX&RX CDR), cost effective modules supporting data rate of 10Gbps and 120km transmission distance with SMF.

The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.

FTCP-151X-H2D 功能框图与主机板推荐接口电路(Host Board ↔ SFP+ Module)

产品特点 / Product Features

  • Supports up to 11.3Gbps bit rates
  • Built-in TX and RX CDR
  • Hot-pluggable SFP+ footprint
  • 1550nm Cooled EML laser and APD photodiode, Up to 120km for SMF transmission
  • Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
  • Compatible with RoHS
  • Single +3.3V power supply
  • Real Time Digital Diagnostic Monitoring
  • Operating case temperature: 0 to +70°C

应用场景 / Applications

  • 10Gbps Optical systems
  • 10GBASE-ZR at 10.3125Gbps
  • 10GBASE-ZW at 9.953Gbps
  • LTE systems
  • Other Optical links

技术参数 / Specifications

绝对最大额定值 / Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Supply Voltage Vcc -0.5 4.5 V
Storage Temperature Ts -40 +85 °C
Operating Humidity – 5 85 %

推荐工作条件 / Recommended Operating Conditions

Parameter Symbol Min Typical Max Unit
Operating Case Temperature Tc 0 +70 °C
Power Supply Voltage Vcc 3.135 3.30 3.465 V
Power Supply Current Icc 1000 mA
Data Rate 9.953 10.3125 11.3 Gbps

光学与电气特性 / Optical and Electrical Characteristics

Parameter Symbol Min Typical Max Unit Notes
Transmitter
Centre Wavelength λc 1530 1550 1565 nm –
Spectral Width(-20dB) Δλ 1 nm –
Side-Mode Suppression Ratio SMSR 30 – – dB –
Average Output Power Pout 2 +6 dBm 1
Extinction Ratio ER 8.2 dB –
Data Input Swing Differential VIN 180 850 mV 2
Input Differential Impedance ZIN 90 100 110 Ω –
TX Disable Disable 2.0 Vcc V –
TX Disable Enable 0 0.8 V –
TX Fault Fault 2.0 Vcc V –
TX Fault Normal 0 0.8 V –
Receiver
Centre Wavelength λc 1260 1600 nm –
Receiver Sensitivity -26 dBm 3
Receiver Overload -7 dBm 3
LOS De-Assert LOSD -27 dBm –
LOS Assert LOSA -35 dBm –
LOS Hysteresis 0.5 4 dB –
Data Output Swing Differential Vout 300 900 mV 4
LOS High 2.0 Vcc V –
LOS Low 0 0.8 V –

Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 231-1 test pattern @10312Mbps, BER ≤1×10-12.
4. Internally AC-coupled.

时序与电气 / Timing and Electrical

Parameter Symbol Min Typical Max Unit
Tx Disable Negate Time t_on 2 ms
Tx Disable Assert Time t_off 100 µs
Time To Initialize, including Reset of Tx Fault t_init 300 ms
Tx Fault Assert Time t_fault 100 µs
Tx Disable To Reset t_reset 10 µs
LOS Assert Time t_loss_on 100 µs
LOS De-assert Time t_loss_off 100 µs
Serial ID Clock Rate f_serial_clock 100 400 KHz
MOD_DEF (0:2)-High VH 2 Vcc V
MOD_DEF (0:2)-Low VL 0.8 V

数字诊断 / Diagnostics

Parameter Range Unit Accuracy Calibration
Temperature 0 to +70 °C ±3°C Internal
Voltage 3.0 to 3.6 V ±3% Internal
Bias Current 0 to 100 mA ±10% Internal
TX Power +2 to +6 dBm ±3dB Internal
RX Power -26 to -6 dBm ±3dB Internal

数字诊断存储映射 / Digital Diagnostic Memory Map

模块通过 2-wire 串行接口(SCL、SDA)提供串行 ID 存储内容以及当前工作状态的诊断信息。

The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA). The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring. The digital diagnostic memory map specific data field defines as following.

FTCP-151X-H2D 数字诊断 2-wire 地址(A0h/A2h)内存映射图

引脚定义 / Pin Descriptions

FTCP-151X-H2D SFP+ 20 脚引脚定义图

Pin Signal Name Description Plug Seq. Notes
1 VEET Transmitter Ground 1
2 TX FAULT Transmitter Fault Indication 3 Note 1
3 TX DISABLE Transmitter Disable 3 Note 2
4 SDA SDA Serial Data Signal 3
5 SCL SCL Serial Clock Signal 3
6 MOD_ABS Module Absent. Grounded within the module 3
7 RS0 Not Connected 3
8 LOS Loss of Signal 3 Note 3
9 RS1 Not Connected 3
10 VEER Receiver ground 1
11 VEER Receiver ground 1
12 RD- Inv. Received Data Out 3 Note 4
13 RD+ Received Data Out 3 Note 4
14 VEER Receiver ground 1
15 VCCR Receiver Power Supply 2
16 VCCT Transmitter Power Supply 2
17 VEET Transmitter Ground 1
18 TD+ Transmit Data In 3 Note 5
19 TD- Inv. Transmit Data In 3 Note 5
20 VEET Transmitter Ground 1

Notes:
Plug Seq.: Pin engagement sequence during hot plugging.
1) TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; Logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2) Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3) LOS is open collector output. Should be pulled up with 4.7k~10kΩ on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
4) RD-/+: These are the differential receiver outputs. They are internally AC-coupled 100Ω differential lines which should be terminated with 100Ω (differential) at the user SERDES.
5) TD-/+: These are the differential transmitter inputs. They are internally AC-coupled, differential lines with 100Ω differential termination inside the module.

推荐接口电路 / Recommended Interface Circuit

FTCP-151X-H2D 主机板与模块推荐接口电路图

主机侧 TX Fault、LOS 为开集输出,需在主机板上以 4.7k~10kΩ 电阻上拉至 2.0V~Vcc(LOS 上拉至 2.0V~3.6V);TX Disable 为模块输入,TD+/TD- 与 RD+/RD- 为模块内部交流耦合的 100Ω 差分线,建议在用户端 SERDES 侧按 100Ω 差分端接;SDA/SCL 需以 4.7k~10kΩ 上拉至 +3.3V。

机械尺寸 / Mechanical Dimensions

FTCP-151X-H2D SFP+ 机械尺寸图(单位:mm)

订购信息 / Ordering Information

Part Number Product Description
FTCP-151X-H2D 1550nm, 10.3Gbps with Tx and Rx CDR, LC, 120km, 0°C~+70°C, with DDM
公司名:北亿纤通 | F-tone Networks
地区:中国四川天府新区
服务区域:全球
联系方式:
企业电话:028-85255257 | 企业传真:028-85977702 | 企业手机:19081343401
Site:https://www.f-tone.com
人事部:hr@f-tone.com | 市场部:sales@f-tone.com | 技术支持:support@f-tone.com

本产品为光模块产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.