FGA 系列 DWDM EDFA 是专为 DWDM 传输系统设计的掺铒光纤放大器(EDFA)模块,可根据客户应用需求集成到 EDFA 卡或机架中。模块工作波长覆盖 C 波段 1528~1565 nm,饱和输出光功率典型 18 dBm,增益 10~33 dB 可调,噪声系数典型 5.5 dB,适用于城域及接入网、DWDM 传输系统的功率放大与在线放大。

图 1 FGA 系列 DWDM EDFA 模块外观
产品特点 / Features
- 兼容紧凑型的 MSA 尺寸
- 工作波长范围宽(1528~1565 nm,C 波段)
- 高输出的光功率和低噪声
- 低功耗(≤10 W)
- 可定制(输出功率、增益、波长范围、光纤与连接器类型等)
应用场景 / Applications
- 城域及接入网
- DWDM 传输系统
- EDFA 卡与机架式集成应用
产品标准 / Standards
- Telcordia GR-1312-CORE
- RoHS
技术参数 / Specifications
| 参数 | 最小值 | 典型值 | 最大值 | 单位 |
|---|---|---|---|---|
| 波长范围 | 1528 | 1550 | 1565 | nm |
| 输入光功率 | -3 | — | 0 | dBm |
| 输出光功率 | — | 18 | — | dBm |
| 增益 | 10 | — | 33 | dB |
| 噪声系数(NF) | — | 5.5 | 6 | dB |
| 增益平坦度 | — | 1.2 | 1.5 | dB |
| 回波损耗 | 45 | — | — | dB |
| PDG | — | — | 0.5 | dB |
| 工作温度 | -40 | — | 85 | ℃ |
| 存储温度 | -40 | — | 85 | ℃ |
| 相对湿度(无凝结) | 15 | — | 85 | % |
| 尺寸 | 90 × 70 × 15 | — | — | mm |
| 功耗 | — | — | 10 | W |
| 电压 | 4.75 | 5 | 5.25 | V |
| 通讯电平 | LVTTL / RS232 | — | — | — |
测试数据曲线 / Test Data
下图为配套光谱仪实测曲线的采集界面,用于读取不同波长点的输入/输出光功率、增益与噪声系数,验证模块在 C 波段内的增益平坦度与输出稳定性。

图 2 光谱仪实测曲线采集界面
通信引脚定义 / Pin Definition
通讯接口类型:2.00 mm 间距,公头插座,共 30 pin。
| Pin | 描述 | Pin | 描述 |
|---|---|---|---|
| 1 | +5V | 16 | NC |
| 2 | +5V | 17 | NC |
| 3 | +5V | 18 | NC |
| 4 | +5V | 19 | NC |
| 5 | Ground | 20 | NC |
| 6 | Ground | 21 | Ground |
| 7 | NC | 22 | Ground |
| 8 | NC | 23 | Serial Input |
| 9 | Ground | 24 | Serial Output |
| 10 | Ground | 25 | Ground |
| 11 | NC | 26 | Ground |
| 12 | NC | 27 | +5V |
| 13 | NC | 28 | +5V |
| 14 | NC | 29 | +5V |
| 15 | NC | 30 | +5V |
产品尺寸 / Outline Dimensions

图 3 产品尺寸与安装孔位(单位:mm)
订购信息 / Ordering Information
FGA 系列型号由以下字段组成:FGA- 前缀 + 饱和输出光功率 + 典型增益值 + 工作波长范围 + 输入输出光纤类型 + 输入输出光纤连接器类型 + 输入输出光纤长度 + 输入输出光纤套管类型 + 可选监控端口。选型时请按下图规则逐位确认。

图 4 FGA 系列型号命名规则
地区:中国四川天府新区
服务区域:全球
联系方式:
企业电话:028-85255257 | 企业传真:028-85977702 | 企业手机:19081343401
Site:https://www.f-tone.com
人事部:hr@f-tone.com | 市场部:sales@f-tone.com | 技术支持:support@f-tone.com
本产品为EDFA光放大器产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.











