FT-13 Series 100G Mini DWDM 双纤波分复用模块(4+4CH,C32-C38)

产品概述 / Description

密集波分复用器(DWDM Mux/Demux)采用薄膜滤光片(Thin Film Coating)技术与专有的无胶金属键合微光学封装工艺,具有低插入损耗、高通道隔离度、宽通带、低温度敏感性以及无环氧胶光路等特点。本页为 100GHz 间隔、双纤(Dual fiber)、Mini 封装的 4+4 通道 DWDM 模块规格。

F-tone Networks 提供全系列 DWDM 产品,包括 50GHz、100GHz 和 200GHz 间隔;凭借丰富的制造经验,可实现极低损耗与高稳定性的 DWDM 器件。支持不同封装与定制封装:玻璃管或不锈钢管裸器件、ABS 盒封装(最高 16 通道,甚至单纤 20 通道复用)、标准 19″ 1U 机架式模块;也可在 Mux/Demux 模块中采用 Skip Component(跳通道)方案以降低总插入损耗。

产品特点 / Features

  • 100GHz 通道间隔,C 波段(C32/C34/C36/C38)
  • 薄膜滤光片 + 无胶金属键合微光学封装,光路无环氧胶
  • 低插入损耗(≤1.5dB)与高隔离度(相邻 >30dB,非相邻 >40dB)
  • 宽通带(100GHz:±0.11nm Min)与低温度敏感性(<0.005dB/℃)
  • 高回波损耗(>45dB)、高方向性(>50dB)、低 PDL(<0.3dB)
  • 最大承受光功率 300mW
  • G657A2 光纤、900μm 松套管,Mini 封装 25.8 × 27 × 6.5mm
  • 工作温度 -40 ~ +85℃,可选 Mux / Demux / OADM 配置

应用场景 / Applications

  • 城域网与骨干网 C 波段容量扩容(100G/200G 相干系统)
  • 数据中心互联(DCI)波分复用
  • 5G 前传/中传的波长汇聚
  • CATV 与模拟光传输的波长复用
  • 实验室与测试系统的多波长合波/分波

性能参数 / Performance Specifications for 100GHz DWDM

Parameter 4 + 4 Channel
Channel Wavelength (nm) C32, C34, C36, C38
Center Wavelength Accuracy (nm) ±0.1
Channel Spacing (GHz) 100GHz
Channel Passband (nm) 100G: ±0.11(Min)
Insertion Loss (dB) ≤1.5
Isolation – Adjacent (dB) >30
Isolation – Non-adjacent (dB) >40
Insertion Loss Temperature Sensitivity (dB/℃) <0.005
Wavelength Temperature Shifting (nm/℃) <0.002
Polarization Dependent Loss (dB) <0.3
Directivity (dB) >50
Return Loss (dB) >45
Maximum Power Handling (mW) 300
Fiber Length (m) >1.0
Fiber Type G657A2,900μm jacket
Connector None
Operating Temperature (℃) -40 ~ +85
Storage Temperature (℃) -40 ~ +85
Package Dimension (mm) L25.8 × W27 × H6.5

Specification may change without notice.

Above specification are for device without connectors.

外形尺寸 / Dimension

100G Mini DWDM 双纤模块外形尺寸图(单位:mm)

100G Mini DWDM 双纤模块外形尺寸,单位:mm

订购信息 / Ordering Information

型号编码:DWDM-X-XX-X-XX-X-X-XX

位 字段 选项
1 Channel Spacing 5 = 50G,1 = 100G,2 = 200G
2 Number of Channels 04 = 4 Channel,08 = 8 Channel,16 = 16 Channel,18 = 18 Channel,N = N Channel
3 Configuration M = Mux,D = Demux,O = OADM
4 1st Channel 01 = C01 …… 21 = C21,22 = C22 …… 61 = C61,SS = special
5 Fiber Type 1 = Bare fiber,2 = 900μm Loose tube,3 = 2mm Cable,4 = 3mm Cable
6 Fiber Length 1 = 1m,2 = 2m,S = Specify
7 In/Out Connector 0 = None,1 = FC/APC,2 = FC/PC,3 = SC/APC,4 = SC/PC,5 = ST,6 = LC,S = Specify
公司名:北亿纤通 | F-tone Networks
地区:中国四川天府新区
服务区域:全球
联系方式:
企业电话:028-85255257 | 企业传真:028-85977702 | 企业手机:19081343401
Site:https://www.f-tone.com
人事部:hr@f-tone.com | 市场部:sales@f-tone.com | 技术支持:support@f-tone.com

本产品为光无源器件产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.