BYSG-813K-20DI-T8 1.25Gb/s 1310nm 单模 SFP 光模块 20km(工业级)

产品简介 / Product Overview

BYSG-813K-20DI-T8 是 F-tone Networks 的 1.25Gb/s 1310nm 单模 SFP 光模块,采用 FP 激光器与 PIN 光电探测器,在 9/125 μm 单模光纤上传输距离可达 20 km。模块为可热插拔 SFP 封装,双工 LC/UPC 接口,单 +3.3 V 供电,金属外壳降低 EMI,符合 SFF-8472 数字诊断(DDM)规范与 MSA 多源协议,支持千兆以太网、交换机间互联、交换背板、路由器/服务器接口等应用。

工业级设计,工作温度 -40 ~ +85℃,并通过 Regulatory Compliance(法规符合性)测试,适合户外机柜、工业现场、轨道交通等宽温环境部署。

产品特点 / Product Features

  • Up to 1.25Gb/s data links
  • FP laser transmitter and PIN photo-detector
  • Up to 20km on 9/125µm SMF
  • Hot-pluggable SFP footprint
  • Duplex LC/UPC type pluggable optical interface
  • Low power dissipation
  • Metal enclosure, for lower EMI
  • RoHS compliant and lead-free
  • Single +3.3V power supply
  • Compliant with SFF-8472
  • Case operating temperature: Industrial -40°C to +85°C

应用场景 / Applications

  • Switch to Switch Interface
  • Gigabit Ethernet
  • Switched Backplane Applications
  • Router/Server Interface
  • Other Optical Links

产品概述 / Description

Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of four sections: the LD driver, the limiting amplifier, the FP laser and the PIN photo-detector .The module data link up to 20km in 9/125um single mode fiber.

The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.

技术参数 / Specifications

引脚定义 / Pin Descriptions

Pin Symbol Name/Description NOTE
1 VEET Transmitter Ground (Common with Receiver Ground) 1
2 TFAULT Transmitter Fault.
3 TDIS Transmitter Disable. Laser output disabled on high or open. 2
4 MOD_DEF(2) Module Definition 2. Data line for Serial ID. 3
5 MOD_DEF(1) Module Definition 1. Clock line for Serial ID. 3
6 MOD_DEF(0) Module Definition 0. Grounded within the module. 3
7 Rate Select No connection required 4
8 LOS Loss of Signal indication. Logic 0 indicates normal operation. 5
9 VEER Receiver Ground (Common with Transmitter Ground) 1
10 VEER Receiver Ground (Common with Transmitter Ground) 1
11 VEER Receiver Ground (Common with Transmitter Ground) 1
12 RD- Receiver Inverted DATA out. AC Coupled
13 RD+ Receiver Non-inverted DATA out. AC Coupled
14 VEER Receiver Ground (Common with Transmitter Ground) 1
15 VCCR Receiver Power Supply
16 VCCT Transmitter Power Supply
17 VEET Transmitter Ground (Common with Receiver Ground) 1
18 TD+ Transmitter Non-Inverted DATA in. AC Coupled.
19 TD- Transmitter Inverted DATA in. AC Coupled.
20 VEET Transmitter Ground (Common with Receiver Ground) 1

Notes:

Circuit ground is internally isolated from chassis ground.

Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.

Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V.MOD_DEF (0) pulls line low to indicate module is plugged in.

This is an optional input used to control the receiver bandwidth for compatibility with multiple data rates (most likely Fiber Channel 1x and 2x Rates).If implemented, the input will be internally pulled down with > 30kΩ resistor. The input states are:

Low (0 – 0.8V): Reduced Bandwidth

(>0.8, < 2.0V): Undefined

High (2.0 – 3.465V): Full Bandwidth

Open: Reduced Bandwidth

LOS is open collector output should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.

Figure2. Pin out of Connector Block on Host Board

主机板连接器引脚排列(Figure 2. Pin out of Connector Block on Host Board)

绝对最大额定值 / Absolute Maximum Ratings

Parameter Symbol Min. Typ. Max. Unit Note
Storage Temperature Ts -40 85 ºC
Relative Humidity RH 5 95 %
Power Supply Voltage VCC -0.5 4 V
Signal Input Voltage -0.3 Vcc+0.3 V
Receiver Damage Threshold +5 dBm

推荐工作条件 / Recommended Operating Conditions

Parameter Symbol Min. Typ. Max. Unit Note
Case Operating Temperature Tcase -40 – 85 ºC BYSG-813K-20DI-T8I
Power Supply Voltage VCC 3.13 3.3 3.47 V
Power Supply Current ICC 280 mA
Power Supply Noise Rejection 100 mVp-p 100Hz to 1Mz
Data Rate 1250/1250 Mbps TX Rate/RX Rate
Transmission Distance 20 KM
Coupled Fiber Single mode fiber 9/125um SMF

发射端规格 / Specification of Transmitter

Parameter Symbol Min. Typ. Max. Unit Note
Average Output Power POUT -9 -3 dBm Note (1)
Extinction Ratio ER 9 dB
Center Wavelength λC 1270 1310 1360 nm FP Laser
Spectrum Bandwidth(RMS) σ 3.5 nm
Transmitter OFF Output Power POff -45 dBm
Differential Line Input Impedance RIN 90 100 110 Ohm
Output Eye Mask Compliant with IEEE802.3 z (class 1 laser safety) Note (2)

Note (1): Measure at 2^7-1 NRZ PRBS pattern.

Note (2): Transmitter eye mask definition.

发射眼图模板(Transmitter Eye Mask)

接收端规格 / Specification of Receiver

Parameter Symbol Min. Typ. Max. Unit Note
Input Optical Wavelength λIN 1270 1610 nm PIN-TIA
Receiver Sensitivity PIN -20 dBm Note (1)
Input Saturation Power (Overload) PSAT -3 dBm
Los Of Signal Assert PA -22 dBm
Los Of Signal De-assert PD -38 dBm Note (2)
LOS Hysteresis PA-PD 0.5 2 6 dB

Note (1): Measured with Light source 1310nm, ER=9dB; BER =<10^-12 @PRBS=2^7-1 NRZ.

Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)

电接口特性 / Electrical Interface Characteristics

Parameter Symbol Min. Typ. Max. Unit Note
Transmitter
Total Supply Current ICC A mA Note (1)
Transmitter Disable Input-High VDISH 2 Vcc+0.3 V
Transmitter Disable Input-Low VDISL 0 0.8 V
Transmitter Fault Input-High VTxFH 2 Vcc+0.3 V
Transmitter Fault Input-Low VTxFL 0 0.8 V
Receiver
Total Supply Current ICC B mA Note (1)
LOSS Output Voltage-High VLOSH 2 Vcc+0.3 V LVTTL
LOSS Output Voltage-Low VLOSL 0 0.8 V

Note (1): A (TX) + B (RX) = 280mA (Not include termination circuit)

推荐电路原理图 / Recommend Circuit Schematic

推荐电路原理图

机械规格 / Mechanical Specifications

机械尺寸图(单位:mm)

法规符合性 / Regulatory Compliance

Feature Reference Performance
Electrostatic discharge(ESD) IEC/EN 61000-4-2 Compatible with standards
Electromagnetic Interference (EMI) FCC Part 15 Class B EN 55022 Class B (CISPR 22A) Compatible with standards
Laser Eye Safety FDA 21CFR 1040.10, 1040.11 IEC/EN 60825-1,2 Class 1 laser product
ROHS 2002/95/EC Compatible with standards
EMC EN61000-3 Compatible with standards

订购信息 / Ordering Information

Product part Number Data Rate
(Mbps)
Media Wavelength
(nm)
Transmission
Distance(km)
Temperature Range(Tcase)(℃)
BYSG-813K-20DI-T8I 1250 Single mode fiber 1310 20 -40~85 industrial
公司名:北亿纤通 | F-tone Networks
地区:中国四川天府新区
服务区域:全球
联系方式:
企业电话:028-85255257 | 企业传真:028-85977702 | 企业手机:19081343401
Site:https://www.f-tone.com
人事部:hr@f-tone.com | 市场部:sales@f-tone.com | 技术支持:support@f-tone.com

本产品为光模块产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.