FTCS-Dxx12-H6DI 1.25Gbps SFP+ DWDM 单模160km 光收发器

FTCS-Dxx12-H6DI 1.25Gbps SFP+ DWDM 单模160km 光收发器

FTCS-Dxx12-H6DI SFP+ DWDM Transceiver

Product Features

  • Supports up to 1.25Gbps bit rates
  • Hot-pluggable SFP+ footprint
  • 100GHz ITU, C Band DWDM Cooled DML laser and APD photodiode
  • Up to 160km for SMF transmission
  • Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
  • Compatible with RoHS
  • Single +3.3V power supply
  • Real Time Digital Diagnostic Monitoring
  • Operating case -40 to +85°C

Applications

  • 1.25Gbps DWDM & SONET networks
  • Bandwidth aggregation
  • Other Optical links

Description

The SFP transceivers are high performance, cost effective modules supporting data rate of 1.25Gbps and 160km transmission distance with SMF. The transceiver consists of a Cooled DML laser transmitter, an APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.

Transceiver Functional Diagram

Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Supply Voltage Vcc -0.5 4.5 V
Storage Temperature Ts -40 +85 °C
Operating Humidity – 5 85 %

Recommended Operating Conditions

Parameter Symbol Min Typical Max Unit
Operating Case Temperature Tc -40 – +85 °C
Power Supply Voltage Vcc 3.135 3.30 3.465 V
Power Supply Current Icc – – 600 mA
Data Rate – – 1.25 – Gbps

Optical and Electrical Characteristics

Transmitter

Parameter Symbol Min Typical Max Unit Notes
Centre Wavelength λc 1528.77 – 1563.86 nm
Spectral Width (-20dB) Δλ – – 1 nm
Side-Mode Suppression Ratio SMSR 30 – – dB
Average Output Power Pout +1.5 – +6 dBm 1
Extinction Ratio ER 8.2 – – dB
Data Input Swing Differential VIN 180 – 850 mV 2
Input Differential Impedance ZIN 90 100 110 Ω
TX Disable (Disable) – 2.0 – Vcc V
TX Disable (Enable) – 0 – 0.8 V
TX Fault (Fault) – 2.0 – Vcc V
TX Fault (Normal) – 0 – 0.8 V

Receiver

Parameter Symbol Min Typical Max Unit Notes
Centre Wavelength λc 1450 – 1620 nm
Receiver Sensitivity – – – -32 dBm 3
Receiver Overload – – – -7 dBm 3
LOS De-Assert LOSD – – -35 dBm
LOS Assert LOSA -40 – – dBm
LOS Hysteresis – – 0.5 – dB
Data Output Swing Differential Vout 300 – 900 mV 4
LOS (High) – 2.0 – Vcc V
LOS (Low) – – – 0.8 V

Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with PRBS 2²³-1 test pattern @1250Mbps, BER ≤1×10⁻¹².
4. Internally AC-coupled.

Timing Characteristics

Parameter Symbol Min Typical Max Unit
Tx Disable Negate Time t_on – – 2 ms
Tx Disable Assert Time t_off – – 100 µs
Time To Initialize t_init – – 300 ms
Tx Fault Assert Time t_fault – – 100 µs
Tx Disable To Reset t_reset 10 – – µs
LOS Assert Time t_loss_on – – 100 µs
LOS De-assert Time t_loss_off – – 100 µs
Serial ID Clock Rate f_serial_clock – 100 400 KHz

Digital Diagnostics

Parameter Range Unit Accuracy Calibration
Temperature 0 to +70 °C ±3°C Internal
Voltage 3.0 to 3.6 V ±3% Internal
Bias Current 0 to 100 mA ±10% Internal
TX Power +1.5 to +6 dBm ±3dB Internal
RX Power -32 to -7 dBm ±3dB Internal

Pin Descriptions

Pin Signal Name Description
1 VEET Transmitter Ground
2 TX FAULT Transmitter Fault Indication
3 TX DISABLE Transmitter Disable
4 SDA SDA Serial Data Signal
5 SCL SCL Serial Clock Signal
6 MOD_ABS Module Absent (Grounded within module)
8 LOS Loss of Signal
10-11 VEER Receiver Ground
12 RD- Inverted Received Data Output
13 RD+ Received Data Output
14 VEER Receiver Ground
15 VCCR Receiver Power Supply
16 VCCT Transmitter Power Supply
17 VEET Transmitter Ground
18 TD+ Transmit Data Input
19 TD- Inverted Transmit Data Input
20 VEET Transmitter Ground

Recommended Interface Circuit

Recommended Interface Circuit

Mechanical Dimensions

Mechanical Dimensions

Mechanical Drawing

Ordering Information

Part Number Product Description
FTCS-Dxx12-H6DI 1528.77~1563.05nm DWDM, 1.25Gbps, LC, 160km, -40°C~+85°C, with DDM

λC Wavelength Guide (100GHz ITU C-Band)

ITU Ch Freq (THz) λ (nm) ITU Ch Freq (THz) λ (nm)
17 191.7 1563.86 40 194.0 1545.32
18 191.8 1563.05 41 194.1 1544.53
19 191.9 1562.23 42 194.2 1543.73
20 192.0 1561.42 43 194.3 1542.94
21 192.1 1560.61 44 194.4 1542.14
22 192.2 1559.79 45 194.5 1541.35
23 192.3 1558.98 46 194.6 1540.56
24 192.4 1558.17 47 194.7 1539.77
25 192.5 1557.36 48 194.8 1538.98
26 192.6 1556.55 49 194.9 1538.19
27 192.7 1555.75 50 195.0 1537.40
28 192.8 1554.94 51 195.1 1536.61
29 192.9 1554.13 52 195.2 1535.82
30 193.0 1553.33 53 195.3 1535.04
31 193.1 1552.52 54 195.4 1534.25
32 193.2 1551.72 55 195.5 1533.47
33 193.3 1550.92 56 195.6 1532.68
34 193.4 1550.12 57 195.7 1531.90
35 193.5 1549.32 58 195.8 1531.12
36 193.6 1548.51 59 195.9 1530.33
37 193.7 1547.72 60 196.0 1529.55
38 193.8 1546.92 61 196.1 1528.77
39 193.9 1546.12 – – –
公司名:北亿纤通 | F-tone Networks
地区:中国四川天府新区
服务区域:全球
联系方式:
企业电话:028-85255257 | 企业传真:028-85977702 | 企业手机:19081343401
Site:https://www.f-tone.com
人事部:hr@f-tone.com | 市场部:sales@f-tone.com | 技术支持:support@f-tone.com

本产品为光模块产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.