FTTR-BxxL3-xxxx 52Mbps 1×9 BIDI 光收发器模块

Product Description

F-tone Networks’ FTTR-BxxL3-xxxx series of transceiver modules are the perfect solution for ultra-low speed communication networks. These transceiver modules support data rates up to 84 Mbps. The module is fully compliant with the Multi-sourced 1×9 protocol.

Product Features

  • FP/DFB Laser Diode Transmitter
  • Up to 60km on 9/125μm SMF
  • 3.3V or 5V power supply
  • SC/ST/FC single optical interface
  • (LV)TTL Input/Output and LVTTL signal detect
  • Class 1 Laser International Safety Standard IEC 825 Compliant
  • Operating case temperature range: Standard 0 to +70℃ or Industrial -40°C to +85°C

Application

  • WDM 52Mb/s Links
  • Digital Video
  • PDH, SDH equipments

Absolute Maximum Ratings

Operating of the transceiver beyond the Absolute Conditions listed in Table 1 will degrade or damage the product.

Parameter Symbol Min Max Units Note
Storage Temperature TST -40 +85 ℃ –
Relative Humidity RH 5 95 % –
Supply Voltage (3.3V power) VCC 0 +3.6 V –
Supply Voltage (5V power) VCC 0 +6 V –

Recommended Operating Environment and Electrical Characteristics

Parameter Symbol Min Typ Max Units Note
Supply Voltage (3.3V) VCC +3.1 +3.3 +3.5 V –
Supply Voltage (5V) VCC +4.75 +5.0 +5.25 V –
Supply Current ICC – – 160 mA –
Operating Case Temperature (Standard) TOP 0 – +70 ℃ 1
Operating Case Temperature (Industrial) TOP -40 – +85 ℃ 2
Data Rate B 2 52 84 Mbps –
Soldering Temperature – – – 350 ℃ 3
Soldering Duration – – – 5 Sec 3

Note: 1. Standard level   2. Industrial level   3. Not recommended wave soldering.

Optical Parameters

FTTR-B13L3-20xx (20km, T1310/R1550)

Parameter Symbol Min Typ Max Units Note
Transmitter
Data Rate B 2 52 84 Mbps –
Output Center Wavelength λc 1260 1310 1360 nm –
Output Spectral Width (RMS) λ – – 4 nm –
Average Optical Output Power Po -14 – -1 dBm 1,2
Extinction Ratio ER 10 – – dB 1,2
Receiver
Receiver Sensitivity Pmin – – -34 dBm 1,2
Receiver Saturation Pmax -3 – – dBm 1,2
Operation Center Wavelength λc 1500 1550 1600 nm –
Deassert PD SDDeassert -45 – – dBm 1,2
Assert PA SDAssert – – -34 dBm 1,2
SD Hysteresis SDHYS 0.5 – – dB –

FTTR-B15L2-20xx (20km, T1550/R1310)

Parameter Symbol Min Typ Max Units Note
Transmitter
Data Rate B 2 52 84 Mbps –
Output Center Wavelength λc 1480 1550 1580 nm –
Output Spectral Width (RMS) λ – – 4 nm –
Average Optical Output Power Po -14 – -1 dBm 1,2,3
Extinction Ratio ER 10 – – dB 1,2
Receiver
Receiver Sensitivity Pmin – – -34 dBm 1,2
Receiver Saturation Pmax -3 – – dBm 1,2
Operation Center Wavelength λc 1260 1310 1360 nm –
Deassert PD SDDeassert -45 – – dBm 1,2
Assert PA SDAssert – – -34 dBm 1,2
SD Hysteresis SDHYS 0.5 – – dB –

Note: 1. The optical power is launched into 9/125μm SMF.   2. With a PRBS 223-1 test pattern @52Mbps.   3. Additional note.

FTTR-B13L3-40xx (40km, T1310/R1550)

Parameter Symbol Min Typ Max Units Note
Transmitter
Data Rate B 2 52 84 Mbps –
Output Center Wavelength λc 1260 1310 1360 nm –
Output Spectral Width (RMS) λ – – 4 nm –
Average Optical Output Power Po -12 – -1 dBm 1,2
Extinction Ratio ER 10 – – dB 1,2
Receiver
Receiver Sensitivity Pmin – – -35 dBm 1,2
Receiver Saturation Pmax -3 – – dBm 1,2
Operation Center Wavelength λc 1500 1550 1600 nm –
Deassert PD SDDeassert -45 – – dBm 1,2
Assert PA SDAssert – – -35 dBm 1,2
SD Hysteresis SDHYS 0.5 – – dB –

FTTR-B15L3-40xx (40km, T1550/R1310)

Parameter Symbol Min Typ Max Units Note
Transmitter
Data Rate B 2 52 84 Mbps –
Output Center Wavelength λc 1480 1550 1580 nm –
Output Spectral Width (RMS) λ – – 4 nm –
Average Optical Output Power Po -12 – -1 dBm 1,2,3
Extinction Ratio ER 10 – – dB 1,2
Receiver
Receiver Sensitivity Pmin – – -35 dBm 1,2
Receiver Saturation Pmax -3 – – dBm 1,2
Operation Center Wavelength λc 1260 1310 1360 nm –
Deassert PD SDDeassert -45 – – dBm 1,2
Assert PA SDAssert – – -34 dBm 1,2
SD Hysteresis SDHYS 0.5 – – dB –

FTTR-B13L3-60xx (60km, T1310/R1550)

Parameter Symbol Min Typ Max Units Note
Transmitter
Data Rate B 2 52 84 Mbps –
Output Center Wavelength λc 1260 1310 1360 nm –
Output Spectral Width (RMS) λ – – 4 nm –
Average Optical Output Power Po -8 – -1 dBm 1,2
Extinction Ratio ER 10 – – dB 1,2
Receiver
Receiver Sensitivity Pmin – – -35 dBm 1,2
Receiver Saturation Pmax -3 – – dBm 1,2
Operation Center Wavelength λc 1500 1550 1600 nm –
Deassert PD SDDeassert -45 – – dBm 1,2
Assert PA SDAssert – – -35 dBm 1,2
SD Hysteresis SDHYS 0.5 – – dB –

FTTR-B15L3-60xx (60km, T1550/R1310)

Parameter Symbol Min Typ Max Units Note
Transmitter
Data Rate B 2 52 84 Mbps –
Output Center Wavelength λc 1480 1550 1580 nm –
Output Spectral Width (RMS) λ – – 4 nm –
Average Optical Output Power Po -10 – -1 dBm 1,2,3
Extinction Ratio ER 10 – – dB 1,2
Receiver
Receiver Sensitivity Pmin – – -35 dBm 1,2
Receiver Saturation Pmax -3 – – dBm 1,2
Operation Center Wavelength λc 1260 1310 1360 nm –
Deassert PD SDDeassert -45 – – dBm 1,2
Assert PA SDAssert – – -35 dBm 1,2
SD Hysteresis SDHYS 0.5 – – dB –

Electrical Parameters

Parameter Symbol Min Typ Max Units Note
Supply Voltage (3.3V) VCC +3.1 +3.3 +3.5 V –
Supply Voltage (5V) VCC +4.75 +5.0 +5.25 V –
Supply Current ICC – – 160 mA –
Transmitter
Data Input Voltage – Low VIL 0 – 0.8 V 1
Data Input Voltage –

推荐产品