FT-13-DWDM-2-04-32-2-1-1 为 200GHz 通道间隔的 4+4 通道双纤 Mini DWDM 波分复用/解复用模块。产品采用薄膜滤波(TFF)镀膜技术与无胶金属键合微光学封装工艺,具有插入损耗低、通道隔离度高、通带宽、温度敏感性低、光路无环氧胶等特点。通道波长自 C32 起连续覆盖 C32、C34、C36、C38,Mini 封装仅 30×26×6.5mm,900μm 松套管尾纤、FC/APC 接头,可直接盘绕安装于机箱内部或模块盒中。
产品描述 / Description
Dense wavelength division multiplexer (DWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path.
F-tone Networks makes full range of DWDM products, including 50Ghz, 100Ghz and 200Ghz. Due to our rich experience of manufacturing, we make DWDM with extremely low loss and high stability and reliability. Different packages and customized package can be offered with request. Common DWDM products package include: bare single DWDM device packed in glass tube or stainless steel tube, DWDM Mux Demux modules packed in ABS box up to 16-channel or even 20-channel Multiplexing on a single fiber or DWDM modules packed in standard 19” 1U rackmount. We can also take “Skip Component” in a DWDM Mux/Demux module to reduce the total IL as an option.
性能指标 / Performance Specifications
| 参数 Parameter | — | 4+4 通道 |
|---|---|---|
| Channel Wavelength (nm) | C32, C34, C36, C38 | |
| Center Wavelength Accuracy (nm) | ±0.2 | |
| Channel Spacing (GHz) | 200GHz | |
| Channel Passband (nm) | ≥0.5 | |
| Insertion Loss (dB) | ≤1.5 | |
| Isolation (dB) | Adjacent | >30 |
| Isolation (dB) | Non-adjacent | >40 |
| Insertion Loss Temperature Sensitivity (dB/℃) | <0.005 | |
| Wavelength Temperature Shifting (nm/℃) | <0.002 | |
| Polarization Dependent Loss (dB) | <0.3 | |
| Directivity (dB) | >50 | |
| Return Loss (dB) | >45 | |
| Maximum Power Handling (mW) | 300 | |
| Fiber Length (m) | >1.0 | |
| Fiber Type | G657A2, 900μm jacket | |
| Connector | None | |
| Operating Temperature (℃) | -40~+85 | |
| Storage Temperature (℃) | -40~+85 | |
| Package Dimension (mm) | L30 × W26 × H6.5 |
规格如有变更,恕不另行通知。Specification may change without notice.
以上指标为不含连接器件的器件指标。Above specification are for device without connectors.
外形尺寸 / Dimension

图 1 外形与安装尺寸(单位:mm)
光路示意 / Fiber Diagram

图 2 光路与端口定义
端口定义
- 上行链路:C38/C36、C34/C32、COM2,尾纤端接 FC/APC;
- 下行链路:C38/C36、C34/C32、COM1,尾纤端接 FC/APC;
- 尾纤规格:0.9mm 松套管,长度 1±0.05m。
订购信息 / Ordering Information
| DWDM | X Channel Spacing |
XX Number of Channels |
X Configuration |
XX 1st Channel |
X Fiber Type |
X Fiber Length |
XX In/Out Connector |
|---|---|---|---|---|---|---|---|
| — | 5=50G 1=100G 2=200G |
04=4 Channel 08=8 Channel 16=16 Channel 18=18 Channel N=N Channel |
M=Mux D=Demux O=OADM |
01=C01 … 21=C21 22=C22 … 61=C61 SS=special |
1=Bare fiber 2=900um Loose tube 3=2mm Cable 4=3mm Cable |
1=1m 2=2m S=Specify |
0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=ST 6=LC S=Specify |










