产品概述 / Description
FTTR-Bxx03-xxxx 是北亿纤通(F-tone Networks)推出的 155Mb/s PECL 单模单纤双向(BIDI)光收发一体模块,采用标准 1×9 管脚封装与 FC 光接口,+3.3V 单电源供电,接口电平兼容标准 PECL 电平。发射端可选 1310nm FP / 1550nm FP 或 1490nm DFB / 1550nm DFB 激光器,配合单纤双向结构,在一根单模光纤上同时完成收发,节省光纤资源。
155Mb/s PECL Single Mode BIDI Optical Module — FC receptacle optical interface, single fiber bi-directional SM optical module, operates data rates 155Mb/s, +3.3V power supply, standard PECL data output with signal detect indication, 1×9 package. Transmitter section selects 1310nm FP / 1550nm FP LD or 1490nm DFB / 1550nm DFB.

产品特点 / Features
- FC 光接口
- 单模单纤光收发一体模块(BIDI)
- 速率 155Mb/s
- +3.3V 供电
- 接口电平兼容标准 PECL 电平
- 标准 1×9 管脚封装
- 发射器件可分别选用 1310nm FP / 1550nm FP 或 1490nm DFB / 1550nm DFB
- 工业级工作温度 -40℃~+85℃,商业级 -20℃~+70℃
应用场景 / Applications
- 快速以太网 / Fast Ethernet
- 同步光网络 / 同步数字系列(SONET/SDH/PDH)
- FTTx 宽带接入系统
- 光纤收发器 / 光端机(Fiber Media Converter / Video Converter)
极限参数 / Absolute Maximum Ratings
| 参数 Parameter | 符号 Symbol | 最小值 Min. | 最大值 Max. | 单位 Unit |
|---|---|---|---|---|
| 工作电压 Supply Voltage | Vcc | 0 | +3.5 | V |
| 储存温度 Storage Temperature | Ts | -40 | +85 | ℃ |
| 相对湿度 Relative Humidity | RH | 5 | 95 | % |
| 引线焊接温度 Lead soldering temperature | T | – | 260 | ℃ |
| 引线焊接时间 Lead Wire Soldering Time | t | – | 10 | S |
推荐使用环境 / Recommended Operating Environment
| 参数 Parameter | 符号 Symbol | 最小值 Min. | 典型 Typical | 最大值 Max. | 单位 Unit |
|---|---|---|---|---|---|
| 工作温度 Operating Case Temperature(工业级) | Tc | -40 | – | +85 | ℃ |
| 工作温度 Operating Case Temperature(商业级) | Tc | 0 | – | +70 | ℃ |
| 供电电压 Supply Voltage | VCCT,R | 3.1 | 3.3 | 3.5 | V |
| 供电电流 Supply Current | ICC | – | – | 200 | mA |
| 速率 Data rate | – | – | 155 | – | Mbps |
技术指标 / Specifications(T=25℃,Vcc=3.1~3.5V)
| 参数 Parameter | 条件 Condition | 最小 Min | 典型 Typical | 最大 Max |
|---|---|---|---|---|
| 工作波长 Wavelength(nm) | 1310 | 1270 | 1310 | 1350 |
| 工作波长 Wavelength(nm) | 1490 | 1480 | 1490 | 1500 |
| 工作波长 Wavelength(nm) | 1550 | 1530 | 1550 | 1570 |
| 电源电压 Power Supply(V) | Vcc | 3.135 | 3.3 | 3.465 |
| 信号电平 Signal Level | LVPECL | – | 1.5~2.3 | – |
| 输出谱宽 Output Spectral Width(nm) | FP-LD, RMS | – | 4 | – |
| 输出谱宽 Output Spectral Width(nm) | DFB-LD, -20dB | – | 1 | – |
| 消光比 Extinction Ratio(dB) | EX | 10 | – | – |
| 发送电流 Current of transmitter section(mA) | Vcc=3.3V | – | – | 100 |
| 接收电流 Current of receiver section(mA) | Vcc=3.3V | – | – | 100 |
Notes:
1. The optical power is launched into 9/125μm SMF.
2. Value of output power and sensitivity can be customized according to the demand.
3. With 155Mbps.
速率、发送功率、灵敏度与传输距离
Data Rate, LD, Wavelength and Mode, Po, Sen, Distance
| 型号 P/N | 速率 Data Rate | 工作波长(nm) Wavelength | 输出平均光功率 PO (dBm) | 灵敏度 Sen (dBm) | 传输距离 Distance |
|---|---|---|---|---|---|
| FTTR-B1303-20xx | 155Mb/s | SM Tx1310/Rx1550nm | -12~-5 | ≤-32 | 20km |
| FTTR-B1503-20xx | 155Mb/s | SM Tx1550/Rx1310nm | -12~-5 | ≤-32 | 20km |
| FTTR-B1303-40xx | 155Mb/s | SM Tx1310/Rx1550nm | -7~-3 | ≤-34 | 40km |
| FTTR-B1503-40xx | 155Mb/s | SM Tx1550/Rx1310nm | -7~-3 | ≤-34 | 40km |
| FTTR-B1303-60xx | 155Mb/s | SM Tx1310/Rx1550nm | -5~0 | ≤-34 | 60km |
| FTTR-B1503-60xx | 155Mb/s | SM Tx1550/Rx1310nm | -5~0 | ≤-34 | 60km |
| FTTR-B1303-80xx | 155Mb/s | SM Tx1310/Rx1550nm | -2~+2 | ≤-34 | 80km |
| FTTR-B1503-80xx | 155Mb/s | SM Tx1550/Rx1310nm | -2~+2 | ≤-34 | 80km |
管脚定义 / Pin Connections
| 管脚 PIN | 管脚名称 Name | 电平 Level | 说明 Description |
|---|---|---|---|
| 1 | GNDR | — | 接收部分接地脚 Signal ground for Receiver |
| 2 | RD+ | LVPECL | 接收部分数据输出 Data output of receiver section |
| 3 | RD- | LVPECL | 接收部分反向数据输出 Reverse data output of receiver section |
| 4 | SD* | LVPECL | 接收部分无光告警 Signal Detect. High level when normal, low level when no light. |
| 5 | VCCR | — | 接收部分正电源 Power supply for receiver, normally +3.3V |
| 6 | VCCT | — | 发送部分正电源 Power supply for transmitter, normally +3.3V |
| 7 | TD- | LVPECL | 发送部分反向数据输入 Reverse Data input of transmitter section |
| 8 | TD+ | LVPECL | 发送部分数据输入 Data input of transmitter section |
| 9 | GNDT | — | 发送部分接地脚 Signal ground for Transmitter |
Notes:
SD:Default Signal Detect,LVPECL mode。
推荐 PCB 孔位布局 / Recommended Board Layout Hole Pattern

接口电路 / Interface Circuit
推荐电路 1 / Recommend Circuit 1

推荐电路 2 / Recommend Circuit 2

外形尺寸及接口定义 / Dimension and Optical Interface
BIDI 边开口 FC 型接口(Type1)/ BIDI FC optical interface on the edge(Type1)

BIDI 边开口 FC 型接口(Type2)/ BIDI FC optical interface on the edge(Type2)

选型 / Ordering Information
| 型号 Part Number | 产品描述 Product Description |
|---|---|
| FTTR-B1303-20 | 1*9 155M BIDI Tx1310/Rx1550nm 20KM FC 3.3V -20°C to +70°C |
| FTTR-B1303-20I | 1*9 155M BIDI Tx1310/Rx1550nm 20KM FC 3.3V -40°C to +85°C |
| FTTR-B1503-20 | 1*9 155M BIDI Tx1550/Rx1310nm 20KM FC 3.3V -20°C to +70°C |
| FTTR-B1503-20I | 1*9 155M BIDI Tx1550/Rx1310nm 20KM FC 3.3V -40°C to +85°C |
| FTTR-B1303-40 | 1*9 155M BIDI Tx1310/Rx1550nm 40KM FC 3.3V -20°C to +70°C |
| FTTR-B1303-40I | 1*9 155M BIDI Tx1310/Rx1550nm 40KM FC 3.3V -40°C to +85°C |
| FTTR-B1503-40 | 1*9 155M BIDI Tx1550/Rx1310nm 40KM FC 3.3V -20°C to +70°C |
| FTTR-B1503-40I | 1*9 155M BIDI Tx1550/Rx1310nm 40KM FC 3.3V -40°C to +85°C |
| FTTR-B1303-60 | 1*9 155M BIDI Tx1310/Rx1550nm 60KM FC 3.3V -20°C to +70°C |
| FTTR-B1303-60I | 1*9 155M BIDI Tx1310/Rx1550nm 60KM FC 3.3V -40°C to +85°C |
| FTTR-B1503-60 | 1*9 155M BIDI Tx1550/Rx1310nm 60KM FC 3.3V -20°C to +70°C |
| FTTR-B1503-60I | 1*9 155M BIDI Tx1550/Rx1310nm 60KM FC 3.3V -40°C to +85°C |
| FTTR-B1303-80 | 1*9 155M BIDI Tx1310/Rx1550nm 80KM FC 3.3V -20°C to +70°C |
| FTTR-B1303-80I | 1*9 155M BIDI Tx1310/Rx1550nm 80KM FC 3.3V -40°C to +85°C |
| FTTR-B1503-80 | 1*9 155M BIDI Tx1550/Rx1310nm 80KM FC 3.3V -20°C to +70°C |
| FTTR-B1503-80I | 1*9 155M BIDI Tx1550/Rx1310nm 80KM FC 3.3V -40°C to +85°C |
地区:中国四川天府新区
服务区域:全球
联系方式:
企业电话:028-85255257 | 企业传真:028-85977702 | 企业手机:19081343401
Site:https://www.f-tone.com
人事部:hr@f-tone.com | 市场部:sales@f-tone.com | 技术支持:support@f-tone.com
本产品为光模块产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.







