CSFP-B1312-20Dxx 1.25Gb/s CSFP 双向光模块 1310nm 20km(单封装双通道)

CSFP-B1312-20Dxx 是一款 1.25Gb/s CSFP 双向(BIDI)光收发模块,在一个 SFP 封装内集成两路独立双向收发通道。模块采用 1310nm FP 激光器,在 9/125 μm 单模光纤上传输距离可达 20 km,单 LC 接口,单 +3.3V 供电,符合 CSFP MSA 2.0(Option 2)与 SFP MSA SFF-8074i,支持商业级与工业级温度选项。

产品特点 / Product Features

  • Two Bi-Directional transceivers in one SFP package
  • Up to 1.25Gb/s data links
  • Duplex LC connector
  • Hot-pluggable SFP footprint
  • 1310nm FP laser transmitter
  • RoHS compliant and Lead Free
  • Up to 20Km on 9/125um SMF
  • Metal enclosure for lower EMI
  • Single +3.3V power supply
  • Compliant with CSFP MSA 2.0 (Option 2)
  • Commercial and industrial operating temperature optional
  • SFP MSA SFF-8074i Compliant
  • Operating case temperature:
  • Standard:0 to +70℃
  • Industrial:-40 to +85℃

应用场景 / Applications

  • Gigabit Ethernet

Fibre Channel

技术参数 / Specifications

法规符合性 / Regulatory Compliance

  • ESD to the Electrical PINs: compatible with MIL-STD-883 Method 3015
  • ESD to the Single LC Receptacle: compatible with IEC 61000-4-2
  • Immunity compatible with IEC 61000-4-3
  • EMI compatible with FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B
  • Laser Eye Safety compatible with FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2
  • RoHS compliant with RoHS 2 (2011/65/EU)

绝对最大额定值 / Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Supply Voltage Vcc -0.5 4.5 V
Storage Temperature Ts -40 +85 °C
Operating Humidity – 5 85 %

推荐工作条件 / Recommended Operating Conditions

Parameter Symbol Min Typical Max Unit
Operating Case Temperature Standard Tc 0 +70 °C
Industrial -40 +85 °C
Power Supply Voltage Vcc 3.13 3.30 3.47 V
Power Supply Current Icc 500 mA
Data Rate 1.25 Gbps
9/125um G.652 SMF Lmax 20 km

光学与电特性 / Optical and Electrical Characteristics

Parameter Symbol Min Typical Max Unit Notes
Transmitter
Centre Wavelength λc 1260 1310 1360 nm
Spectral Width(RMS) Δλ – – 3 nm
Side-Mode Suppression Ratio SMSR – – – dB
Average Output Power Pout -9 -3 dBm 1
Extinction Ratio ER 6.0 – – dB
Optical Rise / Fall Time tr / tf – – 260 ps 2
Receiver
Centre Wavelength λc 1530 1550 1570 nm
Receiver Sensitivity – – -22.5 dBm 3, 4
Receiver Overload -3 – – dBm
LOS De-Assert LOSD -25 dBm
LOS Assert LOSA -40 dBm
LOS Hysteresis – 0.5 – 5 dB
LOS High 2.0 Vcc V
Low 0.8 V

Notes:

1. Class 1 Laser Safety.

2. Unfiltered, 20-80%. Complies with Gigabit Ethernet eye masks when filtered.

3.Measured with conformance signals defined in FC-PI-2 Rev. 10.0 specifications.

4.Measured with PRBS 27-1 at 10-12 BER.

数字诊断 / Diagnostics

Parameter Range Unit Accuracy Calibration
Temperature 0 to +70 °C ±3°C Internal
-40 to +85
Voltage 2.97 to 3.63 V ±3% Internal
Bias Current 0 to 100 mA ±10% Internal
TX Power -9 to -3 dBm ±3dB Internal
RX Power -22.5 to -3 dBm ±3dB Internal

EEPROM 信息 / EEPROM Information

Memory map for 2ch Compact SFP (option 2) is illustrated in below figure. A0h (1010000X) and B0h (1011000X) are the Serial ID addresses for channel 1 and channel 2, respectively A2h (1010001X) and B2h (1011001X) are the Digital Diagnostic addresses for channel 1 and channel 2.

CSFP 数字诊断存储映射(A0h/B0h、A2h/B2h 双地址)

引脚定义 / Pin Descriptions

Pin Signal Name Description Plug Seq. Notes
1 VeeT Transmitter Ground (Common with Receiver Ground)
2 TX Fault Transmitter Fault.
3 TX1_ Disable Transmitter Disable of Ch1; Turns off transmitter laser output of Ch1.
4 MOD_DEF(2) 2-wire Serial Interface Data Line (SDA).
5 MOD_DEF(1) 2-wire Serial Interface Clock Line (SCL).
6 TD2- Inverted Transmit Data Input of Ch2.
7 TD2+ Transmit Data Input of Ch2.
8 LOS1 Loss of signal for Ch1.
9 RD2+ Received Data Output of Ch2.
10 RD2- Inverted Received Data Output of Ch2.
11 VeeT Transmitter Ground.
12 RD1- Inverted Received Data Output of Ch1.
13 RD1+ Received Data Output of Ch1.
14 LOS2 Loss of signal for Ch2.
15 VccR Receiver Power Supply.
16 VccT Transmitter Power Supply.
17 Tx2_Disable Transmitter Disable of Ch2; Turns off transmitter laser output of Ch2.
18 TD1+ Transmit Data Input of Ch1.
19 TD1- Inverted Transmit Data Input of Ch1.
20 VeeT Transmitter Ground

Notes:

TX_ Fault is internally OR output for TX fault conditions in either Channel 1 or Channel 2. In order to determine which channel is at fault, the Host can read the internal memory bits for.

SFP 引脚定义(20-pin,Towards Bezel / Towards ASIC)

主机板连接器引脚排列 / Pin-out of Connector Block on Host Board

推荐接口电路 / Recommended Interface Circuit

2 通道 CSFP 模块与主机板连接框图

机械尺寸 / Mechanical Dimensions

机械尺寸图(单位:mm)

订购信息 / Ordering Information

Part Number Product Description
CSFP-B1312-20D 1310T/1550R 1.25Gbps LC 20km 0°C~+70°C with DDM
CSFP-B1312-20DI 1310T/1550R 1.25Gbps LC 20km -40°C~+85°C with DDM

本型号发射波长为 1310nm;配对使用的 1550nm 发射端型号为 CSFP-B1512-20Dxx,成对使用构成双向链路。

公司名:北亿纤通 | F-tone Networks
地区:中国四川天府新区
服务区域:全球
联系方式:
企业电话:028-85255257 | 企业传真:028-85977702 | 企业手机:19081343401
Site:https://www.f-tone.com
人事部:hr@f-tone.com | 市场部:sales@f-tone.com | 技术支持:support@f-tone.com

本产品为CSFP 双向光模块产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.