Product Description
F-tone’s FTTR-Bxx12-80xx BIDI series of transceiver modules are the perfect solution for high-speed communication networks. These transceiver modules support data rates up to 1.25Gbps. The module is fully compliant with the Multi-sourced 1×9 protocol. These single fiber Bi-Directional transceiver modules provide the system designer with products to implement a range of Fiber Channel and Gigabit Ethernet designs at the 1.06/1.25Gbps rate for communications.
Product Features
- DFB Laser Diode Transmitter
- Up to 80Km on 9/125μm SMF
- 3.3V or 5V power supply
- SC/ST/FC single optical interface
- (LV)PECL Differential Input/Output and (LV)PECL or (LV)TTL signal detect
- Class 1 Laser International Safety Standard IEC 825 Compliant
- Operating case temperature range: Standard: 0 to +70°C / Industrial: -40°C to +85°C
Application
- Gigabit Ethernet
- Fiber Channel
- Digital Video Transmission System
- Other Optic Link
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Units | Note |
|---|---|---|---|---|---|
| Storage Temperature | TST | -40 | +85 | ℃ | – |
| Relative Humidity | RH | 5 | 95 | % | – |
| Supply Voltage (3.3V power) | VCC | 0 | +3.6 | V | – |
| Supply Voltage (5V power) | VCC | 0 | +6 | V | – |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typ | Max | Units | Note |
|---|---|---|---|---|---|---|
| Supply Voltage (3.3V) | VCC | +3.1 | +3.3 | +3.5 | V | – |
| Supply Voltage (5V) | VCC | +4.75 | +5.0 | +5.25 | V | – |
| Supply Current | ICC | – | – | 260 | mA | – |
| Operating Case Temperature (Standard) | TOP | 0 | – | +70 | ℃ | 1 |
| Operating Case Temperature (Industrial) | TOP | -40 | – | +85 | ℃ | 2 |
| Data Rate | B | 100 | 1250 | 1500 | Mbps | – |
Optical Characteristics — FTTR-B4512-80xx (1490T/1550R)
| Parameter | Symbol | Min | Typ | Max | Units | Note |
|---|---|---|---|---|---|---|
| Transmitter | ||||||
| Data Rate | B | 100 | 1250 | 1500 | Mbps | – |
| Output Center Wavelength | λc | 1470 | 1490 | 1510 | nm | – |
| Output Spectral Width (-20dB) | Δλ | – | – | 1 | nm | – |
| Average Optical Output Power | Po | -2 | – | +3 | dBm | 1,2 |
| Extinction Ratio | ER | 8.2 | – | – | dB | 1,2 |
| Receiver | ||||||
| Receiver Sensitivity | Pmin | – | – | -26 | dBm | 1,2 |
| Receiver Saturation | Pmax | -3 | – | – | dBm | 1,2 |
| Operation Center Wavelength | λc | – | 1550 | – | nm | – |
| Deassert PSD | – | -35 | – | – | dBm | 1,2 |
| Assert PSD | – | – | – | -26 | dBm | 1,2 |
| SD Hysteresis | SDHYS | 0.5 | – | – | dB | – |
Optical Characteristics — FTTR-B5412-80xx (1550T/1490R)
| Parameter | Symbol | Min | Typ | Max | Units | Note |
|---|---|---|---|---|---|---|
| Transmitter | ||||||
| Data Rate | B | 100 | 1250 | 1500 | Mbps | – |
| Output Center Wavelength | λc | 1530 | 1550 | 1570 | nm | – |
| Output Spectral Width (-20dB) | Δλ | – | – | 1 | nm | – |
| Average Optical Output Power | Po | -2 | – | +3 | dBm | 1,2 |
| Extinction Ratio | ER | 8.2 | – | – | dB | 1,2 |
| Receiver | ||||||
| Receiver Sensitivity | Pmin | – | – | -26 | dBm | 1,2 |
| Receiver Saturation | Pmax | -3 | – | – | dBm | 1,2 |
| Operation Center Wavelength | λc | – | 1490 | – | nm | – |
| Deassert PSD | – | -35 | – | – | dBm | 1,2 |
| Assert PSD | – | – | – | -26 | dBm | 1,2 |
| SD Hysteresis | SDHYS | 0.5 | – | – | dB | – |
Note 1: The optical power is launched into 9/125μm SMF.
Note 2: With a PRBS 2²³-1 test pattern @1250Mbps.
Electrical Characteristics
| Parameter | Symbol | Min | Typ | Max | Units | Note |
|---|---|---|---|---|---|---|
| Supply Voltage (3.3V) | VCC | +3.1 | +3.3 | +3.5 | V | – |
| Supply Voltage (5V) | VCC | +4.75 | +5.0 | +5.25 | V | – |
| Supply Current | ICC | – | – | 260 | mA | – |
| Transmitter | ||||||
| Differential Input Voltage | VIN P-P | 400 | – | 2000 | mV | – |
| Input Differential Impedance | Zin | 90 | 100 | 110 | Ω | – |
| Receiver | ||||||
| Differential Output Voltage | VOUT P-P | 400 | – | 2000 | mV | – |
Pin Definitions
| Pin # | Pin Name | Description | Note |
|---|---|---|---|
| 1 | RX VEE | Receiver Signal Ground | – |
| 2 | RD+ | Receiver Data Out | – |
| 3 | RD- | Receiver Data Out Bar | – |
| 4 | SD | Signal Detect, (LV)PECL or (LV)TTL outputs | 1 |
| 5 | RX VCC | Receiver Power Supply | – |
| 6 | TX VCC | Transmitter Power Supply | – |
| 7 | TD- | Transmitter Data In Bar | – |
| 8 | TD+ | Transmitter Data In | – |
| 9 | TX VEE | Transmitter Ground | – |
Ordering Information
| Part Number | Product Description |
|---|---|
| FTTR-B4512-80 | 1×9 Transceiver Module, BIDI, 1490T/1550R, 1.25G, 80km, 0 to +70°C |
| FTTR-B4512-80I | 1×9 Transceiver Module, BIDI, 1490T/1550R, 1.25G, 80km, -40°C to +85°C |
| FTTR-B5412-80 | 1×9 Transceiver Module, BIDI, 1550T/1490R, 1.25G, 80km, 0 to +70°C |
| FTTR-B5412-80I | 1×9 Transceiver Module, BIDI, 1550T/1490R, 1.25G, 80km, -40°C to +85°C |
Region: Tianfu New Area, Sichuan, China
Service Area: Global
Tel: 028-85255257 | Fax: 028-85977702 | Mobile: 19081343401
Site: https://www.f-tone.com
HR: hr@f-tone.com | Sales: sales@f-tone.com | Support: support@f-tone.com
本产品为【光模块】产品线，详细信息，请联系我们的销售人员，谢谢！
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
