Video SMPTE SFP
Fiber Optic Transport of HD/SD-SDI It is becoming increasingly necessary and economically feasible to transport HD/SD-SDI signals over fiber instead of coaxial cable. The reasons are many including increased bandwidth, lower cabling cost, noise immunity and greater transmission distances. Prior to 2006, several standards were used to define how SDI signals were to be transported over fiber. Now, there is one standard to define the many aspects and parameters of the fiber optic interface for the transmission and reception of SDI over fiber. SMPTE 297-2006: This standard defines the fiber optic interface for the transmission and reception of SDI signals at various data rates: 12G, 6G, SMPTE 259M: 143 through 360 Mbps SMPTE 344M: 540 Mbps SMPTE 292: 1.485 and 1.485/1.001 Gbps SMPTE 424M: 2.97 and 2.97/1.001 Gbps SMPTE 297-2006 defines many parameters of the optical interface for both a transmitting and receiving device with a fiber optic interface. The input to a fiber Transmitter can be any one of the SMPTE coaxial-based standards indicated above. On the Receiver, the output will be of the same coaxial interface type of the Transmitter. The significance of the new 297 standard is that it allows for interoperability between fiber optic devices from different manufacturers that comply with the standard.
Fiber Optic Transport of HD/SD-SDI
It is becoming increasingly necessary and economically feasible to transport HD/SD-SDI signals over fiber instead of coaxial cable. The reasons are many including increased bandwidth, lower cabling cost, noise immunity and greater transmission distances. Prior to 2006, several standards were used to define how SDI signals were to be transported over fiber. Now, there is one standard to define the many aspects and parameters of the fiber optic interface for the transmission and reception of SDI over fiber.
SMPTE 297-2006: This standard defines the fiber optic interface for the transmission and reception of SDI signals at various data rates: 3G ~ 12GSMPTE 259M: 143 through 360 MbpsSMPTE 344M: 540 MbpsSMPTE 292: 1.485 and 1.485/1.001 GbpsSMPTE 424M: 2.97 and 2.97/1.001 Gbps
SMPTE 297-2006 defines many parameters of the optical interface for both a transmitting and receiving device with a fiber optic interface. The input to a fiber Transmitter can be any one of the SMPTE coaxial-based standards indicated above. On the Receiver, the output will be of the same coaxial interface type of the Transmitter. The significance of the new 297 standard is that it allows for interoperability between fiber optic devices from different manufacturers that comply with the standard.
Video and Studio equipment
SMPTE 12G Digital Video Transceiver, Single TX, Single RX, Dual RX, Dual TX
P/N
Package
Data Rate
Temperature
Module Type
MSA
12G Video Transceiver SFP+
FTLP-1312G-10-RXX
SFP+
0.27~11.88Gbps
C
Transceiver
MSA
FTLP-1312G-10-RNXX
SFP+
0.27~11.88Gbps
C
Transceiver
NON-MSA
FTLP-1612G-14XRXX
CWDM SFP+
0.27~11.88Gbps
C
Transceiver
MSA
FTLP-1612G-14XRNXX
CWDM SFP+
0.27~11.88Gbps
C
Transceiver
NON-MSA
12G Video Receiver SFP+
FTLP-12G-R-RXX
SFP+
0.27~11.88Gbps
C
Single receiver
MSA
FTLP-12G-R-RNXX
SFP+
0.27~11.88Gbps
C
Single receiver
NON-MSA
FTLP-12G-DR-RNXX
SFP+
1.485~11.88Gbps
C
Dual receiver
NON-MSA
12G Video Transmitter SFP+
FTLP-1312G-T-10-R
SFP+
0.27~11.88Gbps
C
Single transmitter
MSA
FTLP-1312G-T-10-RN
SFP+
0.27~11.88Gbps
C
Single transmitter
NON-MSA
FTLP-1312G-DT-10-RN
SFP+
1.485~11.88Gbps
C
Dual transmitter
NON-MSA
FTLP-1612G-T-XR
CWDM SFP+
0.27~11.88Gbps
C
Single transmitter
MSA
FTLP-1612G-T-XRN
CWDM SFP+
0.27~11.88Gbps
C
Single transmitter
NON-MSA
FTLP-1612G-DT-XYRN
CWDM SFP+
1.485~11.88Gbps
C
Dual transmitter
NON-MSA
When XX=PS (only for transceiver and receiver) represents it supports pathological signals. When XX=blank (only for transceiver and receiver) represents it doesn’t support pathological signals. No CDR version (replace “R” in PN with “V”) for application when there is CDR in host side.
For the latest specification and samples, please, contact us This email address is being protected from spambots. You need JavaScript enabled to view it.
document.getElementById(‘cloak2c43a87e2dcf8b48b986326f938d179d’).innerHTML = ”;
var prefix = ‘ma’ + ‘il’ + ‘to’;
var path = ‘hr’ + ‘ef’ + ‘=’;
var addy2c43a87e2dcf8b48b986326f938d179d = ‘sales’ + ‘@’;
addy2c43a87e2dcf8b48b986326f938d179d = addy2c43a87e2dcf8b48b986326f938d179d + ‘eoptolink’ + ‘.’ + ‘com’;
var addy_text2c43a87e2dcf8b48b986326f938d179d = ‘sales’ + ‘@’ + ‘eoptolink’ + ‘.’ + ‘com’;document.getElementById(‘cloak2c43a87e2dcf8b48b986326f938d179d’).innerHTML += ‘‘+addy_text2c43a87e2dcf8b48b986326f938d179d+’<\/a>‘;
SMPTE 6G Digital Video Transceiver, Single TX, Single RX, Dual RX, Dual TX
P/N
Package
Data Rate
Temperature
Module Type
MSA
6G Video Transceiver SFP+
FTLS-1360-10-VXX
SFP+
0.27~5.94Gbps
C
Transceiver
MSA
FTLS-1360-10-VNXX
SFP+
0.27~5.94Gbps
C
Transceiver
NON-MSA
FTLS-1660-14XVXX
CWDM SFP+
0.27~5.94Gbps
C
Transceiver
MSA
FTLS-1660-14XVNXX
CWDM SFP+
0.27~5.94Gbps
C
Transceiver
NON-MSA
6G Video Receiver SFP+
FTLS-60-R-VXX
SFP+
0.27~5.94Gbps
C
Single receiver
MSA
FTLS-12G-R-VNXX
SFP+
0.27~5.94Gbps
C
Single receiver
NON-MSA
FTLS-12G-DR-VNXX
SFP+
0.27~5.94Gbps
C
Dual receiver
NON-MSA
6G Video Transmitter SFP+
FTLS-1360-T-10-V
SFP+
0.27~5.94Gbps
C
Single transmitter
MSA
FTLS-1360-T-10-VN
SFP+
0.27~5.94Gbps
C
Single transmitter
NON-MSA
FTLS-1360-DT-10-VN
SFP+
0.27~5.94Gbps
C
Dual transmitter
NON-MSA
FTLS-1660-T-XV
CWDM SFP+
0.27~5.94Gbps
C
Single transmitter
MSA
FTLS-1660-T-XVN
CWDM SFP+
0.27~5.94Gbps
C
Single transmitter
NON-MSA
FTLS-1660-DT-XYVN
CWDM SFP+
0.27~5.94Gbps
C
Dual transmitter
NON-MSA
When XX=PS (only for transceiver and receiver) represents it supports pathological signals. When XX=blank (only for transceiver and receiver) represents it doesn’t support pathological signals.
For the latest specification and samples, please, contact us This email address is being protected from spambots. You need JavaScript enabled to view it.
document.getElementById(‘cloak22d2a4ac76f61567bcfcee07685f17a8’).innerHTML = ”;
var prefix = ‘ma’ + ‘il’ + ‘to’;
var path = ‘hr’ + ‘ef’ + ‘=’;
var addy22d2a4ac76f61567bcfcee07685f17a8 = ‘sales’ + ‘@’;
addy22d2a4ac76f61567bcfcee07685f17a8 = addy22d2a4ac76f61567bcfcee07685f17a8 + ‘eoptolink’ + ‘.’ + ‘com’;
var addy_text22d2a4ac76f61567bcfcee07685f17a8 = ‘sales’ + ‘@’ + ‘eoptolink’ + ‘.’ + ‘com’;document.getElementById(‘cloak22d2a4ac76f61567bcfcee07685f17a8’).innerHTML += ‘‘+addy_text22d2a4ac76f61567bcfcee07685f17a8+’<\/a>‘;
