10G SFP+ Loopback
The Electrical Loopbacks from EOPTOLINK intend to support Telecom and Datacom applications, which provide a method for port operations testing in board and system. They are hot swappable, constructed metal cast for excellent EMI performance. EOPTOLINK’s SFP & SFP+ Electrical Loopbacks are compliant with the SFP & SFP+ Multi-Source Agreement (MSA) Specification. They comply with SONET, SDH, Gigabit Ethernet, Fiber Channel and the OIF Proposal for a Unified 10G Specification. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the SFP&SFP+ MSA. Especially, EOPTOLINK’s SFP&SFP+ have two LED indicators to display the operating status. The green indicator lights when module is loaded correctly, and it blinks when module’s temperature is beyond the allowable range. The red indicator displays power-down status, and blinking when module shuts down itself due to the highest or lowest temperature it can bear.
Supports 100Mb/s to 10.7Gb/s bit rates
Hot-pluggable MSA footprint
Dual LED indicator to display module status
Built-in digital diagnostic functions
Operation case temperature range -40°C to 85°C
Compliant with SONET, SDH, GBE, FC
1W/1.5W/2W & customized power consumption
Automatically shut down & self-protection
Pluggable times up to 500
Board and system level testing
Test and measurement
Switch and Router chamber testing
Part No.
Description
Power Consumption
Latch
Temp.
FTLP-XLB
SFP+ 10G Loopback
1w
Metal
I
FTLP-XLB-1
SFP+ 10G Loopback
1.5w
Metal
I
FTLP-XLB-2
SFP+ 10G Loopback
2w
Metal
I
